Shenzhen Meiri Purification Technology Co., Ltd.
MAKE ROOM JUST HYGIENIC
Add to Cart
Stainless Steel Cleanroom Garment & Shoe Cabinet | Dual-Zone ISO 14644 | 40-Person Capacity
Glass-fronted cleanroom wardrobe with H13 filtration system, designed for particle-controlled environments requiring hygienic garment storage. Ideal for pharmaceutical facilities, semiconductor cleanrooms, and biotech labs with ISO 14644 compliance needs.
Dual-Zone Contamination Control
Independent HEPA-Filtered Chambers:
Garment zone: ISO 14644 Class 5 (≤3,520 particles/m³ @0.5μm)
Shoe zone: ISO 14644 Class 7 (≤352,000 particles/m³ @0.5μm)
Negative pressure interlocks prevent cross-contamination during access.
Material Segregation:
304/316L stainless steel partitions with electropolished welds (Ra ≤0.4μm | ASTM A967).
High-Capacity Storage
40-Person Configuration:
Adjustable shelves (25-50cm height) accommodate XXS-XXL cleanroom suits and safety boots (ISO 20345 compliant).
Modular design supports vertical expansion for facilities with ceiling heights up to 4m.
Smart Environment Management
Humidity & Temperature Control:
Active RH regulation (30-50% ±3%) with HEPA-dried airflow to prevent microbial growth.
Real-time monitoring via 7-inch HMI touchscreen (FDA 21 CFR Part 11 compliant).
ESD-Safe Grounding:
Conductive flooring (10^6-10^9Ω surface resistance | ANSI/ESD S20.20).
Hygienic Maintenance
CIP-Ready Surfaces:
Sprayball-compatible design for closed-circuit cleaning with 4% NaOH/70% ethanol.
Quick-Disassembly Rails:
Tool-free removal of shelves/racks for autoclave sterilization (121°C/15psi validated).
Separates sterile gowns (ISO Class 5) from shoes (ISO Class 7) in EU GMP Annex 1 Grade A/B areas.
Validated for VHP (vaporized hydrogen peroxide) decontamination cycles.
Semiconductor Fabs (Class 1-100 Cleanrooms)
Stores SMIF pods-compatible garments and ESD footwear in AMC-controlled lithography zones.
Copper-shielded variants available for RF interference-sensitive environments.
BSL-3/BSL-4 Laboratories
Double-door pass-through configuration with bio-seal gaskets (ISO 10648-2 leak rate ≤0.25%/h).
Autoclave integration for Ebola/COVID-19 PPE containment.
Food & Dairy Processing Plants
Hygienic segregation of USDA/FDA-compliant uniforms and boots.
Resists daily CIP washes with chlorinated alkaline detergents.
Nuclear Power Plant Change Rooms
Lead-lined doors (0.5mm Pb equivalent) for radioactive zone transitions.
Tritium-resistant gasket materials (NORSOK M-710 certified).
FAQ 1:
Q: How to prevent cross-contamination between garments and shoes in shared storage?
A: Dual independent HEPA-filtered zones maintain ISO Class 5 separation (≤0.1% interzone leakage per ISO 14644-3).
FAQ 2:
Q: Can humidity-sensitive PPE (e.g., electrostatic suits) be stored long-term?
A: Active humidity control (30-50% RH ±5%) with HEPA-dried airflow protects ESD materials.
FAQ 3:
Q: Is rapid installation possible in operational cleanrooms without shutdown?
A: Modular assembly with silicone-sealed joints allows 8-hour retrofit (zero particle release validated).